Tooth Pitches

Tooth pitch is measured in number of teeth per inch. For Combi (variable) tooth pitches, the two figures represent the highest and lowest number of teeth per inch in each group of teeth

Regular Tooth Pitch

The distance between the teeth is constant throughout the blade.Suitable to cut solid materials on sawing machines with efficient clamping. Very effective on high alloy steels and exotic alloys.

Combi (Variable) Tooth Pitch

Combi tooth pitch is based on groups of different pitches being repeated at regular intervals throughout the blade. The reduction of vibrations through resonance during cutting is the major advantage of this pitch. Sawing thin-wall hollow sections and material in bundles or with weak clamping are typical applications for this tooth pitch configuration.

Recommendations for tooth selection

Solid Material

Tubes

Normal-Toothing		Combi-Toothing			Röntgen HM-Titan
Cross section	Pitch	Cross section	Pitch		Cross section	Toothing
< 10mm	14 ZpZ	< 25mm	10/14	ZpZ	50 - 120 mm	3/4	ZpZ
10 - 30 mm	10 ZpZ	15 - 40 mm	8/12	ZpZ	100 - 250 mm	2/3	ZpZ
30 - 50 mm	8 ZpZ	25 - 50 mm	6/10	ZpZ	150 - 400 mm	1,5 / 2	ZpZ
50 - 80 mm	6 ZpZ	35 - 70 mm	5/8	ZpZ	350 - 600 mm	1,1 / 1,6	ZpZ
80 - 120 mm	4 ZpZ	40 - 90 mm	5/6	ZpZ	> 500 mm	0,85/1,15	ZpZ
120 - 200 mm	3 ZpZ	50 - 120 mm	4/6	ZpZ*
200 - 400 mm	2 ZpZ	80 - 180 mm	3/4	ZpZ*
300 - 700 mm	1,25 ZpZ	130 - 350 mm	2/3	ZpZ
> 600 mm	0,75 ZpZ	150 - 450 mm	1,5/2	ZpZ
		200 - 600 mm	1,1/1,6	ZpZ
		> 500 mm	0,75/1,25	ZpZ
*Please notice that it is also possible to choose our Combi pitch 4/5 for these cross sections.

Wall-Thickness S [mm]	Outside diameter in mm D [mm] Tooth selection (tpi)
	20	40	60	80	100	120	150	200	300	500
2	14	10/14	10/14	10/14	10/14	8/12	8/12	8/12	8/12	5/8
3	14	10/14	10/14	8/12	8/12	8/12	8/12	6/10	6/10	5/8
4	10/14	10/14	8/12	8/12	8/12	6/10	6/10	5/8	5/8	4/6
5	10/14	10/14	8/12	8/12	6/10	6/10	5/8	4/6	4/6	4/6
6	10/14	10/14	8/12	8/12	6/10	6/10	5/8	4/6	4/6	4/6
8	10/14	8/12	8/12	6/10	5/8	5/8	4/6	4/6	4/6	4/6
10	-	8/12	6/10	5/8	4/6	4/6	4/6	4/6	4/6	4/5
12	-	8/12	6/10	4/6	4/6	4/6	4/6	4/6	4/6	4/5
15	-	8/12	6/10	4/6	4/6	4/6	4/6	4/5	4/5	4/5
20	-	-	4/6	4/6	4/6	4/6	4/5	4/5	4/5	3/4
30	-	-	-	4/6	4/6	4/5	4/5	4/5	4/5	2/3
50	-	-	-	-	-	-	4/5	3/4	2/3	2/3
80	-	-	-	-	-	-	-	3/4	2/3	2/3
> 100	-	-	-	-	-	-	-	-	2/3	1,5/2

For thin tubes (up to 8 mm wall-thickness) it is advisable to choose the toothing with 0° cutting angle.

Our application engineers would be glad to assist you in selecting the right band saw blade and provide reliable cutting parameters for your specific sawing application.

News

RÖNTGEN Imagevideo
Have a look at our new Image-video!
Watch the video

Video: BI-ALFA vs. HM-TITAN
The comparison of both band saw blades!
Watch the video

Video: Wi SOLAR - RÖNTGEN
Watch the video

Video: 125 years RÖNTGEN
please watch video