RRR-Plus

RÖNTGEN RRR-Plus hardback carbon band saw blades have a pin-point carbide structure of 30 – 50 grains per 100 µm² and precision milled tooth profiles. A special heat treatment process increases the tensile strength of the steel backing material and the wear resistance of the tooth edge. These features result in a premium quality, long-life carbon band saw blade.

AREA OF APPLICATION

plates
solid material, round
angles, small

TEETH PER INCH

Hook tooth

3 4 6 8 10 14 18 24  
6 x 0,65   B B           1/4 x .025
8 x 0,65     B           5/16 x .025
10 x 0,65   B B           3/8 x .025
13 x 0,65 B B B           1/2 x .025
16 x 0,80   B             5/8 x .032
20 x 0,80 B B             3/4 x .032
25 x 0,90   B B           1 x .035

[Translate to UK:] Normal tooth

3 4 6 8 10 14 18 24  
6 x 0,65     B B B B B B 1/4 x .025
8 x 0,65     B B B B B B 5/16 x .025
10 x 0,65     B B B B B B 3/8 x .025
13 x 0,65     B B B B B B 1/2 x .025
16 x 0,80   B B B B B   B 5/8 x .032
20 x 0,80     B B B B B   3/4 x .032
25 x 0,90   B B B B B     1 x .035

Width x Thickness (mm)

 

Width x Thickness (inch)

 

Hook tooth

The hook tooth has a positive cutting angle of 10°. This tooth form is particularly well suited for solid, thick-walled tubes and all higher-grade alloy material.

Normal tooth

The normal tooth has a cutting angle of 0°. It is suitable for material with a high carbon content (such as cast iron), for material with small cross sections and for thin-wall profiles and tubes.